Powerful sound from above
This two-way speaker features a powerful, 6.5 inch woofer with bass reflex port. This enhances the bass efficiency, giving you a deep, full-range sound, even at lower volumes. The dedicated 1 inch tweeter provides a detailed sound, with enough clarity to cut through background noise.
Ideal for use with suspended ceilings – supplied with tile rails
Supplied with tile rails and tail rail spacers, the CM60DTD is ideal for use with suspended ceilings. Two-point, clamp fixing makes installing the speaker a quick and easy job.
Back can for reduced noise leakage
Another feature that makes the CM60DTD ideal for use within suspended ceiling is the built-in back can. This encapsulates the rear of the speaker, greatly reducing the amount of sound leakage – meaning anyone in the room above is far less likely to be disturbed by the sound below.
Ultimate flexibility – use as a 70V or 100V line speaker
Designed to be used with line speaker systems or as a conventional, passive speaker, the CM20DT ceiling speaker fits almost all applications. Suitable for use in 70V or 100V line speaker systems, this Dual Transformer version suits most commercial speaker systems. With power taps at 60 – 30 – 15 – 7.5 - 3.75 watts for the 70V application and 60 – 30 – 15 – 7.5 watts for the 100V transformer, there’s a wide range of power output versatility.
Or use as a passive speaker
Alternatively, select the passive setting and use the CM60DTD as a conventional 16 ohms speaker. In 16 ohms use, you can connect up to four loudspeakers in parallel on each channel of a standard 4 ohms amplifier.
Using a low profile grille, the speaker sits as flush as possible within the ceiling. The removable grille is also spray paintable – letting it blend right in with the décor. For safety purposes, the grille is fitted with a safety cord, meaning that even if the magnetic connection is breached, the grille won’t fall off completely.
|Frequency Response (Hz)||65 - 20,000|
|Power Rating (Watts)||60|
|Dimensions WxHxD (mm)||258 x 157|
Document version V.01
Last update date: October 1st, 2021
We make every effort to ensure your purchase is delivered on time and in good working condition.
In the event a system or component you purchased from Technologies Flame Company (NewtechBusiness) is damaged in shipping, fails before the warranty period has ended, or you just need to return it, please refer to the steps below to return your purchase.
For Products Under Warranty:
- Please have a description of your issue on hand when you contact support.
- Technologies Flame support team will assist you in troubleshooting the problem remotely
- If remote troubleshooting is unable to correct or identify the problem you will be instructed to fill out the RMA Request Form. An RMA number will be issued to return the defective system or component.
For Items Damaged During Shipping:
Once a purchase has been delivered, it is the customer's responsibility to inspect systems and/or components for damage incurred during shipping. If your purchase is damaged during shipping you must contact Technologies Flame within five (5) business days of receipt of product(s) to receive a refund or replacement for your purchase. Damaged items returned after the five-day period, without notifying Technologies Flame , will not be covered. Any requests to return a damaged item made after the five (5) day return period will be handled on a case-by-case basis.
For Outright Returns:
Returns NOT related to product warranties or damage during shipping are handled on a case-by-case basis. If you would like to return a product or system purchased through Technologies Flame you must notify Technologies flame team within 15 business days.
Returned systems and components are subject to a 20% restocking fee, and must be accompanied by an RMA number provided by an authorized representative Technologies Flame
To get an RMA number, you will have to fill out the RMA Request Form
All Items returned to IT Creations must have shipping labels addressed as follows:
Technologies Flame Company.
RMA: (Reference # Here)
Muheet Street, Al Nadheem, Riyadh City, Saudi Arabia
The RMA number must be included in the shipping return label when shipping back to Technologies Flame. Items must be shipped before the applicable warranty expires to receive a refund.
Purchases that have not shipped may be cancelled within one business day and are subject to a 20% restocking and fulfillment fee.
Shipping expenses are not included unless part of your service agreement with Technologies Flame.
All software purchases are final.
All new retail product purchases are final
If you have any questions about this payment policy, the practices of this website, or your dealings with this website, please contact us using the following details:
Full name: Technologies Flame Limited
Email address: firstname.lastname@example.org
Postal address: Technologies Flame Limited Muheet Street, Al Nadheem, Riyadh City, Saudi Arabia, Riyadh, Riyadh, Al Nadheem, SA
Telephone number: 920011980